Setting Up a Graphical Floor Plan

Setting Up a Graphical Floor Plan

By default the table grid is active on all POS, but a FloorPlan can be drawn that can represent the layout of the tables onsite.

A Mouse and Keyboard are recommended for this 

Turn On Floor Plan

On the POS you will draw the map of the tables
1) Enter Maintenance then Interfaces
2) Select FloorPlan
3) Press Enable/Disable, 

This will enable the graphical FloorPlan on this POS.
FloorPlan will now be Green and Enabled

4) Press Maintenance
5) Select Edit Tables

Set a Location Name

6) Enter the name of the Location and Press Accept

To add a new location Press New Location and enter the location name

Create Tables

7) Press New Square or New Round Table
The selected Shape Table will appear on on your map

8) In the Name field on the right enter the Name for this table
It will appear in the middle of the table

9) The table can be dragged by clicking and holding on the tables border. To Resize click and drag on the small squares around the table border.
10) Press Save to save the table and repeat for required tables



11) While on a table layout you can only have 100 tables, on a graphical layout you can have many more. You can save up to 100 on each "page" so we always recommend that you start with a new hundred range on each page ie for a restaurant with 3 rooms page 1 will have tables 1 to 59, page 2 will have tables 100 to 164, page 3 will have tables 200 to 275. 

Only the NAME of the table should be changed.
Each Table Number needs to be unique across all tables.

Sharing The Graphical Floor Plan Across All Tills

Once you have setup a graphical plan you must contact our support team and ask the support team to get all your tills to look at the same plan.

    • Related Articles

    • Setting Up Payment Types

      Payment types can be added for various reasons for accounting for how items are paid for. These are setup in Maintenance > Payment Types 1) Select Add Payment Type 2) Press Payment Name and enter the name for this new Payment Type, then press Ok 3) ...

    • Table Names on Table Grid

      By default the table grid is filled with tables numbered Table #1 through to Table #99. These can be edited to be more relevant for your site. 1) Enter Maintenance 2) Select Table Names 3) Select on the Table you want to change from the grid 4) Press ...

    • The Set up Guide

      This manual is suited for managers as it takes you through setting up some of the daily functions used on the POS. This manual is available to download at the bottom of this article. Setting Up Staff 1) Enter Maintenance 2) Press Staff 3 a) To add a ...

    • Setting Up Staff

      Creating New Staff: 1) Enter Maintenance 2) Press Staff 3a) To add a new staff member, press Add 3b) To edit a staff member, select their name and press Edit 4) Press on the blue button under the heading, Name 5) Enter the staff member's name and ...

    • Setting Up Quick Messages

      Quick Messages can be setup to provide a Quick Reason when doing some functions in POSbiz. Quick Messages can be set for: Refunds, Cancels, POS Messaging (Broadcasts), Float Adjustments, Writeoffs, Cash Drawer Opening. These are set in Maintenance > ...